Injection Molding Machine Scre

Injection Molding Machine Barrel

Technology Index:Material 38 CrMoA1A(JIS SACM645)42 CrMo(AISI 4140)Nitriding Layer HardnessHV≥900Nitriding Layer Depth0.5-0.8mmDiameterΦ12-Φ300mmSurface RoughnessRa0.4μmL/...

Screw for Injection Machine

Bimetallic Grade:38crmoala + Bimetallic Alloy; Diameter of Screw:D12-D300 Mm; L/D Ratio of Screw:10-50; Nitriding Layer Depth:0.5-0.8 Mm; Nitriding Layer Hardness:950-1020HV; Nitriding Fragility:Less Than Grade Two

Injection Screw Barrel for PMMA

Material:38 CrMoA1A(JIS SACM645)/42 CrMo(AISI 4140); Diameter:Φ12-Φ300mm; L/D Ratio:10-56; Nitriding Fragility:Less than grade two; Nitriding Layer Hardness:HV≥900; Nitriding Layer Depth:0.5-0.8mm

Screw for Injection Molding Machine

Bimetallic Grade:38crmoala + Bimetallic Alloy; Nitriding Layer Depth:0.5-0.8 mm; Nitriding Layer Hardness:950-1020Hv; Nitriding Fragility:Less Than Grade Two

Injection Molding Machine Single Screw

Material:38 CrMoA1A(JIS SACM645)/42 CrMo(AISI 4140); Diameter:Φ12-Φ300mm; L/D Ratio:10-56; Nitriding Fragility:Less than grade two; Nitriding Layer Hardness:HV≥900; Nitriding Layer Depth:0.5-0.8mm