Conical Twin Screw Barrel


Technical Information for twin screw barrel for pipe extrusion
Main Base Materials 1.38CrMoAlA (SACM645) Main Alloy Materials 1. Ni-based alloy/Deloro alloy
  2. SKD-61 (Special Tool Steel)   2. Tungsten carbide/Wolfram carbide
  3. 42CrMo (Ultrahigh StrengthSteel)   3. NiCo-based alloy
  4. DC53 (Cold WorkDie Steel)   4. Fe-based alloy
  5. W6Mo5Cr4V2 (High-SpeedToolSteel)   5. Co-based alloy
Processing Technics 1. Heat treatment Technical Parameters Nitriding layer depth:0.5-0.8mm
  2. Quenching   Nitrided hardness:900-1000HV
  3. Nitriding treatment   Bimetallic layer depth:3 mm
  4. Bimetallic alloy welding for screw   Bimetallic hardness:57~69HRC
  5. Bimetallic alloy centrifugal casting for barrel   Hard-chrome plating hardness after nitriding:≥950HV
  6. Hard-chrome electroplating   Chrome-plating layer depth:0.03-0.09mm
  Linearity of screw:0.015mm   Surface roughness:Ra 0.4

Copyright 2008,Zhoushan Jianghai Screws Manufacture Co., Ltd. All Rights Reserved.

Imprint | Copyright | Privacy | Terms of Use | Site Map